.
.
1. There is one screw in each corner of the plate (see red circle above). Remove the four (4) screws.
2. Lift the plate and remove.
3. Remove the the 4 screws which connect the brush to the plate and replace the bush.
4. Reassemble unit,
|
|
. |
|
|
. |
| The brush which helps keep the pass head clean will need replacement depending upon usage of the binding machine. To replace the brush (all floor binding models): 1. There is one screw in each corner of the plate (see red circle above). Remove the four (4) screws. 2. Lift the plate and remove. 3. Remove the the 4 screws which connect the brush to the plate and replace the bush. 4. Reassemble unit,
|